We are one of the established names of the industry engaged in supplying a qualitative range of Vibratory Finishing Machine. Customers can avail these machines from us in variegated sizes and specifications as per their specific requirements. With the aid of our dedicated quality controllers, we ensure that only defect-free components are dispatched to the clients'' end.
Used for:
De-burring
Polishing
De-scaling
Surface improvement
General purpose work
Continuous processing
Inspection
Features:
Efficient removal of process fluid for best surface finish
All internal welds ground smooth
Bowls shot blasted before and after Polyurethane lining for painting
Anti rotation motor locking plate provided
Additional Features:
Complete Polyurethane lined bowl including separation area
Complete Polyurethane dam flap to avoid metal contact instead of metal flap
Polyurethane corrosion resistant paint for longer life in acidic /alkaline environments
Accident proof media outlet design for total safety
Benefits:
Economical
Full automation capability
Better media/parts mixing owing to its cascade and circular action
Vibratory bowl with automatic separation
Specifications:
Model | Processing volume in litre | Motor power (HP) | Bowl O.D.(m.m) | Bowl chamber width(m.m) |
SE-75 | 75 | 1.0 | 850 | 220 |
SE-150 | 150 | 2.0 | 1050 | 270 |
SE-200 | 200 | 2.5 | 1150 | 300 |
SE-300 | 300 | 3.0 | 1350 | 350 |
SE-600 | 600 | 7.5 | 1500 | 400 |
Gained by the years of experience in this domain, we are able to come up with high performance and reliable range of Zoom Stereo Microscope. These offered products are is widely used in the various industries for various magnification application and perform reliable performance.
Features:
Cost-effective
Highly durable
Optimality
High performance
Seamless finish
Trinocular Observation Head:
Siedentopf observation head inclined at 45°
Diopter adjustment ring on both ocular tube
Interpupillary distance from 55mm to 75mm
Specifications:
Objectives:
Mechanical body
Inclined and transmitted light system with 12V-10W halogen tungsten lamp
The system regulated with transformer has intensity control knob
On/off switch to provide flexibility to use either both light or any of them
Clip for holding specimen
Lateral zoom control movement
We are counted among the most distinguished organizations that are engaged in manufacturing, supplying, trading and exporting a qualitative range of Profile Projector (PP5-D ). Manufactured using high-grade raw-material procured from trustworthy vendors of the market, these products comply with the norms and regulations of prevailing industrial standards.
Features:
Specifications:
PP5-DΦ800Digital Measuring Projector
PP5-CΦ800Date Processing Projector
High accuracy and easy to find the center point
Equipped with a rotary worktable
Spinning angle of work table: ±15°
Suitable for pieces with helical angle
Additional Information:
Clients can avail from us latest version of Cast Iron Analysis Software. Offered software package is compatible with various platforms and can be attached with any kind of cameras, frame grabbers and other input devices. This software allows cut, copy and paste, features that shows highlighted selected portion. We offer these packages at industry-leading prices.
Features:
Provides complete analysis of micro structure of Cast Iron
Identification of ASTM 247-67, ISO 945-1, IS 945-1, DIN EN945, JIS G 5504 standards
Separate modules for Gray cast iron & SG/Ductile iron
Distribution (designated by capital letter A to E)
Size (Designated by Arabic No 1 to 8)
Flakes occurring in cast iron is reported by form I
Percentage of PEARLITE is calculated by excluding the GRAPHITE area
Report is generated with specific International standard
F% is reported in JIS Method
Used in:
Steel plants
Metal forging industry
Oil & gas industry
Material science
Mineralogy
Metal analysis
Quality control
SPECIFICATIONS
Models | HV-1000ZDT???Approved by CE certificate, ensure the safety operation of the machine. Certificate No.: GB/1067/3980/12 Issue 1??? |
Testing Force | 10g(0.098N)???25g (0.245N)???50g (0.49N)???100g (0.98N )???200g (1.96N)???300g (2.94N)???500g (4.9N)???1000g(9.8N) |
Scale | HV0.01???HV0.025???HV0.05???HV0.1???HV0.2???HV0.3???HV0.5???HV1???HV2 |
Min. Measuring Unit | 0.25μm |
Hardness Value Rang | 1HV-4000HV |
Hardness Value of Reading | Digital LCD Screen |
Total Magnification of Microscope | 100X???For Observation??????400X???For Measurement??? (Can be extended to 200X or 600X) |
Loading Method | Automatically (Load, dwell and unload the testing force??? |
Duration Time | 1-99s |
Switch Type of Objective lens and Indenter | Auto Turret (Objective Lenses-Indentor-Objective Lenses switching Automatically) |
Specimen Allowing Maximum Height | 85mm |
Distance from Indenter Center to Fuselage | 120mm |
Overall Dimension | 490×185×515mm???L×W×H??? |
Net Weight | 45kg |
Light Source | LED Cold light source (can be continuous use for 24 hours, no heat generated, servicing life can reach 100,000 hours??? |
Power Supply | 110V/220V + 5%, 50/60 Hz |
X-Y Testing Table | Dim.:100×100 mm, Max. Travel Range: 25×25mm, Moving Resolution Ratio: 0.01mm |
Data Output | Built-in Printer???Hardness Value, The Max. And Min. Value, Testing times and Average Value??? Built-in RS-232 interface |
Standard Accessories | 1 piece: 10X micrometer eyepiece; 10X and 40X objective lens; Vickers indenter; X-Y Testing Table; Flat Fixture; Small Parts Fixture; Water level; Power line; Dust cover; Instruction Book; Hardness Conversion Tables;Accessory case 2 pieces: |
Additional Information:
Type | SE-1000DT |
Test force | 10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N) |
Rulers | HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 |
Minimum measurement unit | 0.25μm |
Measuring the hardness range | 1HV-4000HV |
Hardness value read | Digital LCD |
Total magnification | 100X (observed), 400X (measurement) (Expandable up to 200X or 600X) |
Loading mode | FULLY AUTOMATIC (loading, dwell, unloading) |
Holding Time | 1-99 seconds |
The objective lens and the press head switch | Manual Turret |
Specimen allows a maximum height | 85mm |
Indenter center to wall distance | 110mm |
Instrument Size | 405 × 290 × 480mm (L × W × H) |
Instrument Weight | 45kg |
Light source | LED cold light source (continuous 24-hour use life of up to 100,000 hours) |
Power supply | 110V/220V + 5%, 50/60 Hz |
XY table | Dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm Minimum reading: 0.01mm (Optional digital XY table, LCD digital display) |
Data Output | Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average) Built-in RS-232 interface |
Implementation of standards | GB/T4340.2 national standards, JJG151 VRof |
Standard fittings, accessories | 10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a |
Optional | Image analysis software, metallurgical equipment, Knoop indenter Knoop hardness block, 15X eyepiece micrometer, 2.5X objective lens, 20X objective lens, 60X objective lens |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Capacity | 6 |
Model | SE |
The mounting press is a mechanical type machine. The thermo set plastics together with specimen being mounted is formed under heated conditions. During this process the pressure is self adjusted by a handle fixed inside the machine.
The mounting press is equipped with a digit temperature controller to establish real-time temperature meanwhile, a timer is equipped to realize the semi-automation of sample – making, while obviously increasing working efficiency. For each specimen-mounting, 8-10 minutes is enough and a mirror-like specimen can be acquired.For permanent mounting of metallographic or rock specimen in thermostaticPlastic, we offer bakelite mounting press, the unit is of a rugged construction and is activated by an hydraulic press, capacity 6-8 ton. The press is supplied complete with mould heater and thermometer. As a standard outfit 25/32/40mmdia mould assembly is supplied along with the machine .The temperature is controlled with Digital controller. Timer with buzzer facility is given within the panel which shows in digital
Technical Data:-
Operation :- Manually by plunger.
Sample Operatio :- At a time single operation can done.
Heating Element :- 750 watt.
Hydraulic Jack :- Capacity 6-8 ton
Digital Controller :- 0-300.degress
Dimensions :- 300mm W x 350mm D x 750mm H.(Approx.).
Weight :- 80-120 Kg. (Approx.)
OPTIONAL ACCESSORIES:-
Moulding Release spray
Rs. 250.00/each bottle
Moulding Powder
Rs. 125.00/Kg
Spare Heaters.
Rs. 1500.00/each
We offer Portable Surface Roughness Tester. These are packed with powerful functions for convenient operations. Powerful Functions and Ease at on-site measurements.
All Functions for convenient Operations Complies with major International standards such as ISO, DIN,CNOMO,JIS,ASME
Data Memory/Battery Operation : Ten complete Data records can be stored. Rechargeable battery operation provides versatile us of the line independent of the line supply.
Measuring in different positions: The small and light handy surf measures not only flat, horizontal, but also vertical and overhead surfaces.
Direct data Transfer to the PC- The RS 232 serial interface is used to transfer measured data,parameters and profile curves directly to the PC.
Specifications:
Product Details:
Minimum Order Quantity | 1 No |
Model | SE |
FEATURES:-
1). Co-axial and fine focussing system with slide traveling on ball bearing guide ways.
2). Inner locating ball bearing nose piece.
3). Observation on trinocular head, compensation(inclined 30degrees)
4). Triple plate for X and Y movement of workstage.
5). Anti-fungal coated objectives.
6) Illumination unit 6V 20W halogen lamp, adjustable brightness...
TRINOCULAR OBSERVATION HEAD:-
Hand rests on both sides.
SPECIFICATION:
1).Objectives- 5x ,10x, 20x, 40x.
2).Eyepiece -WF 10 x (paired
3).Camera-CCD or digital camera provision.
4).Illumination - Light Attachment.
5).Magnification -50x to 400x.,
STANDARD ACCESSORIES:-
Metallurgical Image Analyzer Software,
Supplementary lenses.
OPTIONAL
Ø Measuring Scale Reticule 10/100
Rs. 7,500.00
Ø 0.5 x reduction lens adaptor
Rs. 5,500.00
Ø Eyepiece 15X
Rs. 10,500.00
With the firm commitment to quality, we are offering assured quality Stereo Zoom Microscope to our esteemed clients. These products are utilized to magnify micro object continuously and accurately to show 3 dimensional image for observation studies in health, medical, forestry and zoology department as well as for repair of tiny precision spare parts of electronic and jewelery.
Features:
Objectives range of zoom magnification: 0.7x-5x
10x Eyepieces field is extra wide and clear
The observation eyepieces tubes are inclined at 45 degree and can be rotated 360 degree, the adjustment range of: 53-75mm
Diopter adjustment ring on ocular tube
All lenses are imported and anti-fungal treated
Provision for camera port at top of the microscope
Specifications:
Mechanical Body:
Lateral zoom control movement
Reflected and transmitted light system with 12V-10W halogen tungsten lamp
The system regulated with transformer has intensity control knob
On/off switch provides flexibility to use either both light or any of them
Clip for holding specimen
Base size is 260 mm X 290 mm
We are among the prominent industry engaged in offering a wide range of Digital Rockwell Hardness Tester to our clients at the most reasonable price. These products are widely used in various industrial application which finally results in better productivity.
Features:
Motorized system for application and removal of major load
Minor load setting by LED bar graph
Keyboard entry for scale selection
Hi-Low-OK indication for hardness value
Easy to read, large size extra bright 7 segment display
Centronics parallel port for connecting Dot Matrix Printer
Manual operation available in case of motor failure
Sufficient error codes for smooth functioning of machines
Serial Interface (Optional)
Indenter is guided in linear bearings facilitates to test small diameter jobs
Automatic weight selection by thumb wheel
The additional test load of 187.5 Kg for brinell scale
Brinell microscope is provided for brinell indentation measurement
Manual weight selection
Separate lever is provided for selection of minor load
With a customer approach mindset, we ensure quality oriented Portable Hardness Tester. We strive to guarantee premium range of this offered product-line, that are in compliance to set industrial specification. These products are widely demanded and appreciated by the latge number of client in industrial sector.
Features:
High performance
Seamless finish
Precisely-engineered
Cost-effective
Optimality
Specializations:
Hardness Scales: HLD, HB, HRC, HRB ,HRA, HV, HS
Accuracy :- + 6 HL
Display :- Bright and clear LCD display with back light
Testing direction :- All direction
Printer :- mini thermal printer with IrDA (cable no need)
Operating voltage : 4.5v (3 AAA batteries)
Operating environment : Temp.: 0~+40°C
Humidity: 20%~85%
Storage environment : temp.: -30~+40°C
Humidity: 5%~95%
Dimension : 150mm x 80mm x 30mm
Weight : 200 gms approx
We are a leading industry offering a wide spectrum of Portable Dynamic Hardness Testers. The product offered is an widely used for various measuring application in industrial sector. The construction of these range is very precise and accurate as these products are fabricated under surveillance of experts.
Features:
Sleek and handy design comes in a slim briefcase for carrying the machine
Alpha numeric display which indicates selected material and scale combination hardness value
Average key to select average of 2 to 10 readings
Improved electronics with micro controller circuitry and user friendly software
30 Hardness scales for different probes selectable by feather touch keys
Auto detection of probe facility
Automatic shut down facility is provided when tester is not in use for continuously 10 minutes
This model operates on 2 numbers of pencil cells
Printing is possible with all types of ports
Up to 100 readings can be stored in memory of the tester for printing purpose
Low test expenditure
Five numbers of probes can be given in different combinations such as Dl, D2, G1, G2 and C, Dl, D2, D3, D4 and D5 and Dl, D2, G1 and SH
Conversion of UTS facility is available on display by using side keys
The ON and OFF switch is provided with feather touch keyboard on front side
In this model both serial and printer interfaces are available on single port
Automatic calibration facility of probe is available through keyboard
Date entry and date wise printout facility
Depending upon the vast industry experience we manufacture and also export a huge gamut of Profile Projector (PP 24). Ideal for use in machinery and instrumentation manufacturing sectors, these projectors are offered In different specifications to meet the varied needs of the clients. Offered at market-leading prices, we ensure that it is timely delivered at the clients'' end.
Features:
Conforms to the design of update molding
Easy to operate
Compact in structure
Long-life halogen tungsten lamps that act as the lighting source
Homogeneous lighting
Super-precision designed body with casting aluminum
Light in weight
Clear imaging
Accurate multiplying factors
Fiber transmission is adopted for the indirect lighting
Two high-and-low adjustable light intensities for transmission and indirect lightings
Adaptable to measuring requirements of different workpieces
Used to measure:
Sample plates
Cross sections
Surface shapes
Applicable on various parts with complicated shapes given as follows:
Cutting tools
Parts for sample plates
Punching pieces
Molding milling cutters
Cams & threads
Gears, taps & thread turning tools
Many others
Additional Information:
With the help of our experienced engineers, we are able to design and develop a vast array Profile Projector (PP 27). Precision-engineered at our state-of-art infrastructure using latest machines and advanced technology, these products are available in varied specifications to suit the exact requirements of the clients. Highly appreciated for their durability, reliable performance and superior finish, offered projectors can be availed from us at market-leading prices.
This range of projectors is widely used to measure surface and profile of various workpieces with complicated profiles and shapes like:
Templates
Punched pieces
Gears
Threads
Formed milling cutters
Various cutters,tools and parts
Machinery- made products
Instruments
Watches
Various others
Additional Information:
Being a coveted firm, we are indulged in the process of making and providing an exclusive Profile Projector (PP 3-D). These projectors provide high transmission with optimum contrast due to their finest quality projection lenses and precision-engineered design. Ideal choice for contour and surface images, offered range is widely appreciated for its accuracy in dimensional measurements and surface inspections.
Features:
Strong supported large worktable
Large measuring range
High load bearing capacity
Motor operated worktable
Movement of worktable: Up and down
Easy to operate
Objectives are converted with a high precision turret
Magnification is changed conveniently
Vibration-free handling of components
Accurate positioning
Uses internal-focusing-type transmission illumination system
Equipped with center cradle & V-type support
Capable of measuring all kinds of shafting components
Advanced data processing system
Additional Information:
Test force | 10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N) |
Rulers | HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 |
Minimum measurement unit | 0.25μm |
Measuring the hardness range | 1HV-4000HV |
Hardness value read | Digital LCD |
Total magnification | 100X (observed), 400X (measurement) (Expandable up to 200X or 600X) |
Loading mode | Fully automatic (loading, dwell, unloading) |
Holding Time | 1-99 seconds |
The objective lens and the press head switch | The manual transfer Taqie change |
Specimen allows a maximum height | 85mm |
Indenter center to wall distance | 110mm |
Instrument Size | 405 × 290 × 480mm (L × W × H) |
Instrument Weight | 45kg |
Light source | LED cold light source (continuous 24-hour use life of up to 100,000 hours) |
Power supply | 110V/220V + 5%, 50/60 Hz |
XY table | Dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm Minimum reading: 0.01mm (Optional digital XY table, LCD digital display) |
Data Output | Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average) Built-in RS-232 interface |
Implementation of standards | GB/T4340.2 national standards, JJG151 VRof |
Standard fittings, accessories | 10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a |
Optional | Image analysis software, metallurgical equipment, Knoop indenter Knoop hardness block, 15X eyepiece micrometer, 2.5X objective lens, 20X objective lens, 60X objective lens |
We are widely accredited organization involved in manufacturing and supplying assured quality Metallurgy Microscope to our esteemed clients. These products are equipped with high-grade lenses and are widely used in various laboratory and are appreciated for their optimum performance and trouble free operations.
Features:
Cost-effective
Highly durable
Optimality
High performance
Seamless finish
Competitive price
Backed by rich industry expertise, we are offering our clients an updated range of Pharmaceutical Analysis Software. Widely demanded across the market, this programmable software offered by us provides highly reliable performance and precise measurements. Delivered within the stipulated time period, this software is developed as per the latest technology prevailing in the market. Furthermore, we offer these packages at market-leading prices.
Features:
User-friendly interface
Excellent & accurate measurements
Reliable
Quality-tested
We have emerged as one of the reputed names of this industry engaged in manufacturing and supplying a vast array of Profile Projector (PP 25). This measuring device specifically integrates optics, electricity, mechanics and computation into a single form to provide precise measurements.
Used in the measuring rooms and workshops of various industries such as:
Machinery manufacture
Instrumentation
Electronics
Automobile
Measures the surface & profile of:
Various parts
Different cutting tools
Sample plate tools
Punching pieces
Cams & gears
Molding milling cutters
Tapping tools
Additional Information:
We are counted among the most distinguished organizations that are engaged in offering our clients Live Measurement Software. Offered program is specifically designed by our well-qualified and skilled engineers in tandem with the prevailing market trends. We offer this software in accordance with the customers'' requirements at reasonable prices.
Features:
Simplest set of program
Without compromising on accuracy
User-friendly
Easy-to-maintain
Updated with latest technologies
Used to measure:
Coating thickness
Depth of Width
Graphite Flakes
Particle Size and Volume Percentage
Nodules Analysis
Decarburization
Porosity Analysis
Others
We are a renowned organization engaged in manufacturing and supplying process of Carbon And Sulphur Apparatus. The offered product is manufactured using superior quality materials so it can ensure complete satisfaction to our clients. Apart from this, the rendered product range is used for the various industrial applications and are appreciated as well due to its high-durability and optimum performance.
Features:
Heavy duty polished wooden frame with best quality clamps to hold glass parts
Furnace outer body CRC/MS sheet duly powder coated having temperature control box with pyrometer
Supplied with digital temperature controller for temp control (on customer request)
Supplied with all glass parts absorption vessel and acid jar and combustion boat
With control unit for tube furnace
Technical Parameters:
Power Consumption | 220/230V AC Supply |
Temperature Range | Amb. To 1350°C |
Optional | Pyrometer 1400°C range & Ditigal Temp. Controller Indicator (On Customer Request) |
Specification:
SE C&S 1.01 | 15 Amps control unit Series |
SE C&S 1.02 | 35 Amps control unit Parallel |
Wooden frame
Voltage control Unit
Tube furnace
Glass parts
With our expertise in this domain, we are able to come forth with the sustainable range of Metallography Moulding Machine. Our team members design these product range keeping in mind the specifications and requirements of our customers. Moreover, the entire product-line can be avail at the most market-leading price in an efficient manner.
Features:
Specifications:
Heater capacity 650 W 220 V
Adjustable temperature range 0 – 400ºC
Power 15% 220V 50 Hz voltage fluctuation less than + 15%
Overall dimensions
Weight 25 Kg. (approx)
We specialize in offering a complete range of Cast Iron Analysis Software. Primarily used in various segments of the industry such as in metal forging, oil & gas, material science and others, these packages are available to the clients at the most competitive prices of the market.
Features:
Capable of providing complete analysis of micro structure of Cast Iron
Separate modules for Gray cast iron & SG/Ductile iron
Identification of ASTM 247-67, ISO 945-1, IS 945-1, DIN EN945, JIS G 5504 standards
Flakes occurring in cast iron is reported by form I
Reports:
Depending upon the vast industry experience, we are offering a wide variety of Textile Software. This program is very useful for quality control in various textile testing laboratories and perform the analysis & micro-measurement of various fabrics and other allied material. With the polarizing microscope, this software is capable of providing real full screen display of image, acquisition, enhancement and annotations. Pre loaded photographs enable identification of fibers without prior knowledge along with creation of library within the same program.
Few of common usage of Textile Pro are:
Micro analysis of yarns and fiber sections
Measurements of:
Length, surfaces, perimeters, angles & distance between two points or lines or objects
Fast and easy way the fineness analysis of single fibers
Purchased material can be checked by comparing it with the fiber pictures stored in the Data bank with the longitudinal and the sectional views
Check and measure the quality and shape of Lycra or synthetic Multifilament single threads
Analyze the compactness of non-woven fabrics
Detect, identify and measure possible impurities contained in textile materials
Analyze the yarn structure and detect possible defects
Measure section surfaces and perimeters
Analyze the compactness of non-woven fabrics
Macro analysis of a yarn section
Analyze mechanical parts like needle points spinnerets etc.
Reduce the fabric warp and weft density to a cm or inch
Product Details:
Application | Industrial |
Material | Mild Steel |
Shape | Vertical |
Automation Grade | Semi Automatic |
Insulation Wall | Double Wall |
Product Details:
Minimum Order Quantity | 1 Piece |
Application | Lab&Pharma |
Material | Stainless Steel |
Shape | Horizontal |
Automation Grade | Fully Automatic |
Installation | Yes |
Insulation Wall | Triple Wall |
Inner Dimensions | 18”x18”x 36” |
Capacity | 175ltrs |
Display | Dial Thermometer (Standard with the unit) |
Sterilizing Pressure | 1.2 kgf/cm² (15 psi) at 121°C |
Operating Pressure | From 15Psi to 20 Psi |
Pressure Gauge | 0-2.1 kgf / cm² (30 Psi) |
Pressure Vessel | Stainless Steel (SS-304) |
Boiler | Stainless Steel (SS-304) |
External Wall | Stainless Steel (SS-304) |
Lid | Stainless Steel (SS-304) |
Tubular Stand and Support Ring | Made of mild steel duly powder coated |
Gasket | Made of Silicon Rubber/NeopreneRubber |
Jacket | Stainless Steel (SS-304) |
Power Supply | 220/230V AC, 50/60Hz or 430/440 Volts, 3 Phase Supply |
Owing to our expertise in this domain, we are offering our clients Medical Software that is designed by our experienced professionals. This program is widely used in various pharmaceutical and Medicare industries for analyzing various products.
Some details about this software are:
Count & classification information:
Identification of objects in an image
Count them
Obtain several features measurements
Objects identification: By user or automatically
User defined classification on basis of size or intensity
Threshold particle measurement details:
Methods to identity intensity range defined object: Manual, Auto bright and Auto dark
Various calculation & measurements available for selected particle are:
Dimensions, Area, Perimeter, Ferrite Length, Min/Max Radius, Thread Length, Thread Width, Fiber Length, Fiber Width
Morphometry includes:
Roundness
Shape
Orientation
Elongation
Equal Circular Diameter
Equal Sphere Volume
Locational types:
Centroid X, Centroid Y, Major X1, Major Y1, Minor X1, Minor Y1, Major X2, Major Y, Major X2, Minor Y2, Box X1, Box X2, Box Y, Box Y2 & Box Area
Segmentation details:
Measure area & volume fraction
Identify multiple phases within Micro structure
Delineate phases from the histogram
The Material Analysis Software that we deal in is used in varied applications and brings huge appreciation for the company as well. The Material Analysis Software that we bring forth is properly tested before its delivery to the esteemed clients in the global market.
The Material Analysis Software that we deal in is used in varied applications and brings huge appreciation for the company as well. The Material Analysis Software that we bring forth is properly tested before its delivery to the esteemed clients in the global market.
Praised For | · Ease of operation · User friendly module · Swift working · Simplifying complex tasks |
Demanded For | · Steel plants · Oil Gas Industry · Metal forging Industry · Material Science |
Additional Information:
Model | DMMP-30 |
pH Range | -2.000 to I6.000pH |
pH Resolution | ±0.001pH |
pH Accuracy | ±0.002pH |
Calibration Points | 2 points, NIST(pH4.00/6.86/9.18) or USA(pH4.01/7.00/10.01] |
mV/ORP Range | 0 to ±1999.9mV |
mV/ORP Accuracy | ±0.2mV |
Temperature Compensation | 0.0 to 100.0°C, Manual or Automatic |
Conductivity Range | 0 to 1.999,19.99,199.9,1999 µ S, 19.99, 200.0mS |
Conductivity Accuracy | ± 0.5% F.S |
Calibration Points | 1 point per range |
Temperature Compensation | 0 to 50°C, Manual or Automatic |
Temperature Coefficient | 0 to 3.9% per°C |
Cell Constant | 0.1,1.0,10 adjustable |
TDS Range | 0 to 100 ppt, Max.200 ppt |
TDS Conversion Factor | 0.01 to 1.00, Default 0.67 |
Salinity Range | 0 to 50 ppt, 0.00 to 5.00% |
Resistivity Range and Accuracy | 0 to 100M,W ± 1%F.S |
Temperature Range | 0.0 to 100.0°C, |
Temperature Accuracy | ±0.3°C, |
Memory & Output | 99 data sets with date/ time stamping |
Power supply | DC 9 V, using AC Adapter 220 VAC, 50 Hz |
Weight | 1.75 kg |
TDS Accuracy | +1% F.S |
Accuracy | ±0.5ppt, ±0.05% |
We are the most prominent manufacturer and supplier of assured quality Digital Weighing Scales at the most reasonable price range. These products are widely accepted as well appreciated by the large number of industrial costumers due to its cost-effectiveness ans optimality.
Features:
Piece counting
Percentage (%} weighing
Check weighing
Filling
Statistics
Recipe
Density measurement for solid and liquid
Fully automatic internal calibration
Self according to change in the ambient temperature
User selected time calibration
Temperature Control | ||
Temperature Sensitivity | ± °C | 1o C or better |
Spatial Deviation In Temperature | ± °C | 0.5 or better |
Readability | °C | 0.1 |
Temperature range | °C | 5°C above ambient to 250°C (Standard) |
Temperature Sensor | PT-100 | |
Temperature Controller | Hydraulic Thermostat/PID controller optional | |
Display | LED/LCD | |
Adjustable alarm limits | Optional With PID controller only. | |
Safety thermostats | ||
Temperature variation Adjustments | 3 (With PID Controllers only) | |
Temperature Sensors | PT-100 | |
Automatic temperature setting | Yes (With PID Controllers only) | |
Adjustable limits | Yes (With PID Controllers only) |
Additional Information:
A test panel is clamped driven by constant speed while needle scratches the surface.These are available in varied specifications and are offered at industry leading prices. We also meet customized requirement.
Automatic Scratch tester specially designed for power coated scratch testing Sheen type with 1kg load & 5kg load.
Constructions | Class II |
Cleanliness (Class) | 90 ft/min +/- 20 feet |
Construction | Industrial grade mica clad wooden board/M.S./S.S. |
Table | Stainless steel sheet table of ss-304 grade |
Per Filters | Washable pre-filter unit |
HEPA Filters | Glass pleated non woven fabric filter having 99.97% Efficiency 0.3 micro particles size. |
Air Flow | Unidirectional. |
Blower Assembly | Centrifugal lubricated bearing type ISI marked assembly |
Illumination | Fluorescent light illumination greater than 800 lux on work table |
Control Panel | Membrane type soft touch key pad |
Noise level | Noise level less than 60db |
Add on features | Gas/air/vacuum line cock |
Power Requirements | 500 watts – 750 watts (Model specific) |
Nominal voltage | 220-230 Volts |
Frequency | 50 Hz Single Phase |
Additional Information:
This set is very useful for any Metallurgical Laboratory. The Metallurgical Microstructure Specimen Sets are prepared under controlled laboratory condition. The offered machines are simple and convenient, extensively used for rough and fine polishing of metallurgical specimens. The thermo set plastics together with specimen being mounted is formed under heated conditions. During this process the pressure is self adjusted by a spring fixed inside the machine.
This set have following specimen:
Additional Information:
With the help of our team of experienced professionals, we manufacture, export & supply an extensive range of Abrasive Cutting Machine For Slicing Large Samples. Manufactured using high grade basic materials keeping in mind set industry norms, this is widely demanded amongst various industries. The Abrasive Cutting Machine For Slicing Large Samples is available in different specifications as per the application requirements of the clients. This machine is extensively recognized for compact design, high thermal resistant nature, corrosion resistance and smooth functionality. In order to ensure quality, this machine is stringently tested on defined parameters.
Specifications:
Heavy duty sectioning machine for large cross sections, irregular components, in short time.
Cutting wheel swings also with the oscillation movement for faster large sectioning than the chop type.
Heavy duty motor is provided 15 HP 3 phase.
Machine is covered with powder coated sheets or stainless steel sheets.
Specially designed heavy steel vice to hold any kind of piece.
Absolute minimal deformation, cool & burn-free sample production.
Large and effective coolant delivery with adjustable focused vains fitted on wheel guard.
Coolant circulation system is provided with suitable filtering arrangement.
Double light attachments system is provided for clean and accurate cutting of samples.
Large viewing window to monitor the cutting operation.
Models:
AC15B
AC15XY
AC15SS
AC15D
Optional Attachment:
Magnetic separator helps cleaning the coolant tank saving frequent cleaning operations.
Variable Speed AC Drive
Product Details:
Minimum Order Quantity | 1 No |
Model | SE-235-R |
Application | Laboratory |
SALIENT FEATURES:
· Clear display
· Fast and Accurate
· Compact design
· Easy to operate
TECHNICAL SPECIFICATIONS:
Instrument Type | Digital TDS Meter |
Model | 235-R |
Display | 3V2 Digit LED |
Range | 5 Range O to lOOOppt |
Accuracy | ±1% FS±1 Digit |
Temperature Compensation | Manual 0 to 100°C |
Cell Constant Adjustment | Adjustable Digital Display |
Conductivity / TDS Cell | DIP Type |
Power | 220V ± 10% 50 Hz |
Our organization is dedicatedly engaged in the business of manufacturing and supplying Specimen Leveller. These are manufactured by a team of skilled experts employing advance machines and tools. The offered products has a unique wedge design helps specimen clamping, perfectly parallel to the grinding disc ensures uniform lapping/grinding.
Features:
High performance
Seamless finish
Precisely-engineered
Cost-effective
Optimality
Accuracy
Temperature Range | Ambient +5ºC to 85ºC |
Stability | Chamber: ± 0.2ºC at 65ºC |
Rocking Speed: | 8 to 25 strokes/min |
Construction Ext | MS DULY Powder Coated |
Temperature Control | PID Micro Processor Controller ±0.5°C |
Temperature Display | Digital LED |
Resolution | 0.1°C |
Circulation | Forced hot air |
Chamber Dimension | 14” x 14” x 14” |
Chamber Material | S.S. -304 |
Platform Dimension | 11” x 11” (Up & Down motion) |
Bottle Capacity | 6 Bottles (Medium Size) |
Additional Information:
We are able to bring forth an impeccable range of Laboratory Water Bath. These products are fabricated and designed by properly utilizing optimum quality raw materials that are as per the specified qualitative norms of the industry.
Features:
Small or large capacity tank
Drain plug made of brass duly nickled on the back of the bath
Full feature with digital temperature controller / indicator and microprocessor based PID temperature controller (on customer request)
With 1/20 HP high speed motor with regulator or 1/70 HP pump stirrer with steel shaft for better circulation
Stability up to 0.5°C or better
Better mineral/ glasswool insulation to keep surface temperature comfortable
Sealed glass window / toughened glass at front for observation of material
Backed by the team of experienced professionals, we are manufacturing and supplying high quality Ceramic Media. This range is fabricated using finest quality raw material in accordance with the industry laid norms & guidelines to provide a flawless range to the clients. Available at competitive prices, we ensure that all the products are in compliance with defined quality parameters. Silicon carbide grit is also used along with aluminum oxide in ceramic media. Widely used in various finishing processes, this range is priced at very reasonable rates.
Features:
Long-lasting shine
Superior finish
Optimum performance
Highly durable
There are different grades of cut within the ceramic media family that are as follows:
The cutting abrasive bonded with ceramic is most commonly aluminum oxide of different grit size. Silicon carbide grit is also used in ceramic media. Ceramic media is a very popular choice in finishing processes because of its long lasting and clean running characteristics.
There are different grades of cut within the ceramic media family:
Polish | Super Fast Cut |
Medium Cut | High Density Fast Cut |
Fast Cut | Light Weight(low density) |
Our enterprise is in the league of prominent firms, rendering assured quality Abrasive Cut Off Wheels. Patrons can avail a wide range of this offered product-line from us at the most reasonable price. We execute the manufacturing process of these products in a well-segregated production unit to ensure zero defect output results.
Features:
High performance
Seamless finish
Precisely-engineered
Cost-effective
Optimality
Accuracy
Being a client-centric organization, we are manufacturing, supplying and exporting a wide range of Ultrasonic Thickness Gauge. All our products are manufactured using qualitative raw material in compliance with the international quality standards. Highly demanded in the market due to their remarkable features like high tensile strength, fine finish, durability and sturdy construction, these products are offered at industry-leading prices.
Used for measuring thickness & corrosion of:
Pressure vessels
Chemical equipment
Boilers
Oil storage tanks
Many others
Applicable in industries such as:
Petroleum
Shipbuilding
Power station
Machine manufacturing
Specifications:
Measuring range (metric/imperial): 1.2-225mm, 0.05-9 inch
Operating principle: ULTROSONIC
Accuracy: ±(0.5%n+0.1)
RS232C interface
Power supply: 4x1.5V AAA (UM-4) battery
Materials measured: Any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and any other material
Sound velocity: 500 - 9000m/s
Lower limit steel pipes: 15x2.0mm, 20x3.0mm or as per clients'' needs
Available with calibration block
Resolution: 0.1mm
Battery indicator: To indicate low battery
We are a prominent organization, which is engaged in manufacturing, supplying and exporting a wide range of Magna Scope. This range of products is widely used for study of Zoological specimens, Botanical specimens and assembly and inspection in various industrial areas. These devices are highly appreciated for giving clear visibility, shadow free and uniform illumination as well as reliable performance.
Specifications:
Diameter of optical glass lens of magnifier: 145 mm
Magnification: 3 x
Mounted on stout stand
Adjustable vertically and horizontally
Circular florescent lamp
Allows the lens to swivel in all directions
Height of the stand: 440mm
Cast iron base dimensions: 200×200x75 mm
Power range: 220V
Linear movement: Up to 220mm
Backed by the pioneered associate professionals having a high experience in this domain, we have emerged as a leading industry involved in the manufacturing Shear Testing Machine. These machines are quality approved that are in accordance to the given industrial specifications and laid norms.
Features:
High performance
Seamless finish
Precisely-engineered
Cost-effective
Optimality
Specifications:
Unique ''Talon-Claw'' grips for round and flat specimens
Torsional speed of 0.1/0.2 RPM
Torque compensated motors
Maintenance free gear box
Auto range selection with range selector wheel
3 or 4 Torque ranges for higher accuracy
Load-unload capability
Variable speed drive
Additional Information:
Our valued patrons can avail from us high quality Digital Turbidity Meter. The rendered product is made, employing latest technology and methodology, in confirmation to the international industrial quality standard.
Features:
High performance
Seamless finish
Precisely-engineered
Cost-effective
Optimality
Accuracy
Reasonable price
High-durability
Wide industrial use
Specifications:
Technical Specification | Turbidity Meter Model - 211 SE | Turbidity Meter Model – 212 SE |
Display | 31/2 Digit LED | 31/2 Digit LED |
Range | 0 to 1000 JTU/NTU | 0 to 200 JTU/NTU |
Resolution | 1 JTU/NTU | 0.1 JTU/NTU |
Accuracy | ± 3% FS ± 1 Digit | ± 1% FS ± 1 Digit |
Power | 220 V±10P Hz | 220 V± 10% 50 Hz |
Light Source | 6V. 1 Amp. Lamp | 6V. 1 Amp. Lamp |
Detector | Photo diode | Photo diode |
Accessories
| Test Tube Set Operation Manual Dust Cover | Test Tube Set Operation Manual Dust Cover |
With the help of our distinguished professionals, we have been able to bring forth an exclusive array of Vision Measuring Machine. This portable vision measurement system is offered as a cost effective solution for manual & small part inspection. We offer this range in varied specifications as per the clients'' needs & demands at reasonable prices.
Features:
WVL200 compact design
Lens power supply by USB or external power
Fine-tuning device
External computer
High portability
Convenient interface
Easy upgrades
OVM Software to handle measuring applications with ease
High tensile strength
Our domain expertise has enabled us to come with a appreciated spectrum of Lubricant Aerosol Spray. All our products are developed by a team of adroit experts, following industry laid norms and guidelines. These products are offered by us are durable and cost-effective in nature.
Features:
High performance
Seamless finish
Precisely-engineered
Cost-effective
Optimality
Accuracy
Reasonable price
We are widely acknowledged business entity, involved in manufacturing and supplying high-grade Digital PH Meter. The offered high quality product is manufactured by using plastic products, PVC, UHM, brass stainless steel, haste-alloy, mild steel and carbon steel. These products are extensively applied in chemical, pharmaceutical, sugar, food, cosmetics, plating, water conditioning and waste water treatment industries where pH monitoring is required.
Features:
High performance
Seamless finish
Precisely-engineered
Cost-effective
Optimality
SE BP Series belt polisher is designed for initial rough grinding, with ¼ and ½ hp motor. The grinder has rigid construction complete enclosed body with full cover mask in its base. Dynamically well balanced rollers made up of aluminium material.
SPECIFICATION:-
Working on :- 220V in single phase
Operation :- Manual
Belt :- 100/915mm Endless Belt
Pulleys System :- Balanced aluminium pulleys
Polishing Motor power :- ½ H.P Single / Single Phase
Additional Information:
Model | LBS-FH-22 | LBS-FH -32 | LBS-FH -42 | LBS-FH -52 | LBS-FH -62 |
Working Size | 2’x2’x2’ | 3’x2’x2’ | 4’x2’x2’ | 5’x2’x2’ | 6’x2’x2’ |
Additional Information:
Model No. | Capacity in Liters | Temperature Range | Control Accuracy @ Minimum Temperature | Trays |
SE-ULDF-170 | 170 | -80°C to -20°C | ± 2°C | 4 |
SE-ULDF-270 | 270 | -80°C to -20°C | ± 2°C | 4 |
SE-ULDF-325 | 325 | -80°C to -20°C | ± 2°C | 4 |
SE-ULDF-500 | 500 | -80°C to -20°C | ± 2°C | 6-Apr |
Cabinet Material | Wooden or Cold Rolled Steel Powder Coated or Stainless Steel (SS-304) |
Work Table | Stainless Steel (SS-304 grade) |
View Window | In work chamber to monitor the samples |
Main Filter | HEPA Filter (99.97% efficient at 0.3 micron particles) |
Pre-Filter | High efficiency pre-filter (Washable) |
Sterilization | By U. V. GermicidalTube in work area |
Manometer | Static pressure analogue type |
Sliding Sash | Counter balanced door for effortless operation |
Noise Level | Less than 65 db |
Standard Accessory | Gas/Air cock and Multipoint 15/5Amp. electric socket |
Electric Supply | AC 230V, 50/60Hz |
Optional Features | |
Static Pressure Manometer | Inclusive |
Exhaust Ducting | Per running feet cost will be charged extra |
HEPA Filtration exhaust | Inclusive |
Virus burn out at Exhaust | Inclusive |
Magnehelic pressure differential gauge | to track filter pressure in lieu of static pressure manometer (Can be provided at an extra cost) |
Interlocking of U.V. germicidal tube &fluorescent light | with auto switch off/on mode for motor blower when the door is closed/open |
Hour meter totalizer for U.V. light | Can be done at an extra cost |
Glove Ports and Gauntlets | Inclusive |
Electronic filter choke alarm (Differential pressure monitor). | Can be done at an extra cost |
Microprocessor LCD controller | With auto switch off mode for motor blower when door is closed |
Digital buzzer timer | Sounds an audio alarm on completion of sterilizing time of the chamber |
Additional Information:
Constructions | Class II |
Cleanliness (Class) | 90 ft/min +/- 20 feet |
Construction | Industrial grade mica clad wooden board/M.S./S.S. |
Table | Stainless steel sheet table of ss-304 grade |
Per Filters | Washable pre-filter unit |
HEPA Filters | Glass pleated non woven fabric filter having 99.97% efficiency 0.3 micro particles size. |
Air Flow | Unidirectional |
Blower Assembly | Centrifugal lubricated bearing type ISI marked assembly |
Illumination | Fluorescent light illumination greater than 800 lux on work table |
Control Panel | Membrane type soft touch key pad |
Noise level | Noise level less than 60db |
Add on features | Gas/air/vacuum line cock |
Power Requirements | 500 watts – 750 watts (Model specific) |
Nominal voltage | 220-230 Volts |
Frequency | 50 Hz Single Phase |
Additional Information:
Additional Information:
Additional Information:
We are a leading manufacturer supplier of quality-approved Digital Conductivity Meter. The offered products is composed of components that are in accordance to laid industrial norms and specification. Apart from this, the offered product range is tested at different parameters, so that we can ensure complete assurance over the rendered product range.
Features:
High performance
Seamless finish
Precisely-engineered
Cost-effective
Optimality
Specifications:
Instrument Type | Digital Conductivity Meter |
Model | 215-R |
Display | 31/2 Digit LED |
Range | 5 Range 0 to 1000m Mhos/cm |
Accuracy | ±1% FS ±1 Digit |
Temperature Compensation | Manual 0 to 100°C |
Cell Constant Adjustment | Adjustable Digital Display |
Conductivity / TDS Cell | DIP Type |
Power | 220V ± 10% 50 Hz |
Additional Information:
Cross-Section Analysis system is a complete lab with the help of which user can analyze the crimp and decide upon the right crimp specification that have to be kept. The Cross-Section Analysis System CA-01 is manufactured / assembled 100% in India. CA-01 system uses the following as a bundled supply:
SPECIFICATION:-
Following functions can be programmed easily;
Length of a drawn line
Distance between 2 points
Distance between two parallel lines
Tangential lines angle
Area
Definition of an area by similar colors chosen (WAND) or
boundary tracing (automatic or manual tracing)
Contour line length / Strands counter and more.