We offer Portable Surface Roughness Tester. These are packed with powerful functions for convenient operations. Powerful Functions and Ease at on-site measurements.
All Functions for convenient Operations Complies with major International standards such as ISO, DIN,CNOMO,JIS,ASME
Data Memory/Battery Operation : Ten complete Data records can be stored. Rechargeable battery operation provides versatile us of the line independent of the line supply.
Measuring in different positions: The small and light handy surf measures not only flat, horizontal, but also vertical and overhead surfaces.
Direct data Transfer to the PC- The RS 232 serial interface is used to transfer measured data,parameters and profile curves directly to the PC.
We are a leading industry offering a wide spectrum of Portable Dynamic Hardness Testers. The product offered is an widely used for various measuring application in industrial sector. The construction of these range is very precise and accurate as these products are fabricated under surveillance of experts.
Sleek and handy design comes in a slim briefcase for carrying the machine
Alpha numeric display which indicates selected material and scale combination hardness value
Average key to select average of 2 to 10 readings
Improved electronics with micro controller circuitry and user friendly software
30 Hardness scales for different probes selectable by feather touch keys
Auto detection of probe facility
Automatic shut down facility is provided when tester is not in use for continuously 10 minutes
This model operates on 2 numbers of pencil cells
Printing is possible with all types of ports
Up to 100 readings can be stored in memory of the tester for printing purpose
Low test expenditure
Five numbers of probes can be given in different combinations such as Dl, D2, G1, G2 and C, Dl, D2, D3, D4 and D5 and Dl, D2, G1 and SH
Conversion of UTS facility is available on display by using side keys
The ON and OFF switch is provided with feather touch keyboard on front side
In this model both serial and printer interfaces are available on single port
Automatic calibration facility of probe is available through keyboard
Date entry and date wise printout facility
We are among the prominent industry engaged in offering a wide range of Digital Rockwell Hardness Tester to our clients at the most reasonable price. These products are widely used in various industrial application which finally results in better productivity.
Motorized system for application and removal of major load
Minor load setting by LED bar graph
Keyboard entry for scale selection
Hi-Low-OK indication for hardness value
Easy to read, large size extra bright 7 segment display
Centronics parallel port for connecting Dot Matrix Printer
Manual operation available in case of motor failure
Sufficient error codes for smooth functioning of machines
Serial Interface (Optional)
Indenter is guided in linear bearings facilitates to test small diameter jobs
Automatic weight selection by thumb wheel
The additional test load of 187.5 Kg for brinell scale
Brinell microscope is provided for brinell indentation measurement
Manual weight selection
Separate lever is provided for selection of minor load
10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N)
HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2
Minimum measurement unit
Measuring the hardness range
Hardness value read
100X (observed), 400X (measurement)
(Expandable up to 200X or 600X)
FULLY AUTOMATIC (loading, dwell, unloading)
The objective lens and the press head switch
Specimen allows a maximum height
Indenter center to wall distance
405 × 290 × 480mm (L × W × H)
LED cold light source (continuous 24-hour use life of up to 100,000 hours)
110V/220V + 5%, 50/60 Hz
Dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm Minimum reading: 0.01mm
(Optional digital XY table, LCD digital display)
Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average)
Built-in RS-232 interface
Implementation of standards
GB/T4340.2 national standards, JJG151 VRof
Standard fittings, accessories
10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a
Image analysis software, metallurgical equipment, Knoop indenter Knoop hardness block, 15X eyepiece micrometer, 2.5X objective lens, 20X objective lens, 60X objective lens
A test panel is clamped driven by constant speed while needle scratches the surface.These are available in varied specifications and are offered at industry leading prices. We also meet customized requirement.
Automatic Scratch tester specially designed for power coated scratch testing Sheen type with 1kg load & 5kg load.
Reviewed by 10 Users
Most Relevant Reviews