Metallurgical Laboratory Equipment

Gained by the years of industrial experience, we are presenting Metallurgical Polishing Machine to our esteemed patrons. These quality machines are widely used in various industries for rough and fine polishing of metallurgical specimens. Powered by high torque A.C/D.C motor, the machine has water faucet and smooth drainage system.

Features:

 

• Drainage system
• Noise less operation
• Easy and quick clamping facility
• Higher results in measuring image analysis study

 

Working:

 

• Specimen is held against a rotating flat disc, on which a polishing cloth, impregnated with suitable polishing media such as silica carbide powder, polishing alumina (all grades)

• The disc is easily removable for quick changing of the polishing cloth or paper

• It can deliver mirror finished specimen completely scratch free and with minimum artifacts, divulging true micro-structure of parent material

 

Accessories:

 

• Paper clamping ring

• Cloth clamping band

• Polishing media (polishing cloth, diamond paste and fluid, separate discs, dropping bottle plastic)

• AC Motor in SE MPM 01 series

• DC Motor in SE MPM 02 series

 

Application areas:

 

• Metallurgical laboratory

• Forging industry

• Fasteners industry

• Casting industry

• Iron and steel industry

• Auto-parts ancillaries

 

Specifications:

Specification:-

 A) abrasive disc - 350mm dia.
 B) disc motor - 2 hp or better, 1440 rpm (minimum approx), 3ph, 50hz, 415 vac supply..
C) suction motor - 1 hp minimum, 2800 rpm, 415v ac, 50hz, tefc type,
D) starter - push button d.O.L starter type with overload preventor,
E) disc housing - made of cast iron and machined to suit the disc plate, disc cover and machine stand at the back of the disc housing the pipeline is connected to the unit for collecting the dust, cooling the polishing disc and for gripping it uniformly at the time of operation,
F) disc plate - made of steel with air gripping arrangement of the polishing disc and with locking system to keep the polishing disc in position.
G) disc cover - machined to suit the disc housing and to cover the disc plate by 180 degree for safety,
H) machine stand - fabricated and machined to suit the disc housing. Main and air gripping unit motor starters are fitted on the machine stand.
I) air gripping unit - fitted with motor and mounted on a frame placed on the comming fabricated base,
J) the machine shall hold the polishing disc by air suction on the disc plate which rotates at a speed of 1440 rpm (approx).
K) the air suction shall hold the polishing disc evenly throughout the surface and collect the dust from the machine at the time of finishing the sample.
L) operation and maintenance manual.

Additional Information:

• Minimum Order Quantity: 1 Number

With the aid of our procuring agents, we are offering Digital Polishing Machine to our respected patrons. These products are widely used in various laboratories for polishing specimen and other respective areas of application. The offered product is equipped with digital speed controller and can be availed at the most market-leading price.

Features:

 

• Cost-effective
• Highly durable
• Optimality
• High performance
• Seamless finish
• Competitive price

 

Specifications:

 

• ½ HP high torque DC motor

• 8" disc diameter Standard

• 10" disc diameter option

• Many discs can be used

• Thyristor controlled speed controller

• Digital speed indicator - 50 to 1200 rpm

With the constant support of our, dexterous workforce, we are able to come up with a wide gamut of Metallurgical Mounting Machine for our esteemed clients at the most market-leading price. These products are widely demanded and appreciated by the clients due to its easy installation and cost-effectiveness.

 

Features:

 

• Cost-effective

• Highly durable

• Optimality

• High performance

• Seamless finish

• Competitive price

With the support of our dexterous workforce, we are able to offer high-grade Metallurgical Cutting Machine at the most market-leading price to our clients. The offered product is equipped with coolant circulation system with suitable filtering arrangement which provide more optimality to the offered cutting machine.

 

Features:

 

• Coolant circulation system is provided with suitable filtering arrangement

• Light attachments system is provided for clean and accurate cutting of samples

• X-Y movement vice is made up of M.S, specially designed

• Heavy duty motor is provided 2/3/5 HP, 3 phase

• Large viewing window to monitor the cutting operation

Technical Specifications:

With an aim to stand tall on the expectations of patrons, we are offering a wide gamut of Automatic Mounting Press. These quality-approved products have great strength and ability to operate smoothly in severe condition.

 

Features:

 

• Cost-effective
• Highly durable
• Optimality
• High performance
• Seamless finish
• Competitive price

 

Specifications:

 

• Pattern specimen: 25 mm, 30 mm, 40 mm, 50 mm

• Power: 220 V 50 Hz

• Maximum consumption: 1800 W

• Pressure: 0~2 mpa

• Temperature: 0~300°C

• Holding time: 0~99 minutes and 99 seconds

• Out line dimension: 615 x 510 x 500 mm

• Weight: 100 Kg

• Cooling: Water cooling

In order to cater ever-changing demands, we are able to come forth with the superior-grade Automatic Polishing Machine to our respected clients. Our entire product-line is extensively demanded and appreciated by the large number of industrial users due to its optimum results and reliable performance.

 

Features:

 

• Digital display rotating speed

• Load pressure and specimen making time are adjustable

• Grinding and polishing disks have two functions: two-level constant speeds and step less speed changing

• Grinding and polishing head can be set to step less speed changing status

• Equipped with beautiful appearance glass fiber reinforced plastic machine shell and full stainless steel parts which never rust

• Equipped with grinding and polishing disks which can be changed swiftly and multi-specimen clamping holder

• Central pressure loading

• Automatic and big volume feeding system of grinding materials

• Processing 6 specimens at same time is available

• One- key restoring program function

 

Specifications:

 

• Grinding and polishing disks rotating speed: 0-600 rpm (step less speed changing) or 150/300 rpm (two-level constant speed)

• Loading range: 1-200 N

• Specimen preparing time: 0-999 seconds

• Max. diameter of specimen: 30 mm

• Diameter of grinding and polishing disks: 250 mm

• Power supply: 220 V 50 Hz

• Dimensions: 660 x 380 x 640 mm

• Net weight: 45 kg

As a quality-centric organization, we are able to come forth with the wide spectrum of Spectro Sample Polisher. These are widely used to prepare high quality sample and are appreciated as well by the large number of patrons due to its cost-effectiveness and longer service period. Apart from this, these products are available at the most competitive range.

 

Features:

 

• Cost-effective

• Highly durable

• Optimality

• High performance

• Seamless finish

• Competitive price

 

Specification:

SPECIFICATION:

Ø  Grinding and Polishing Wheel Diameter: 250mm

Ø  Abrasive Paper Diameter: 250mm

Ø  Platen Speed: 50 to 600RPM

Ø  Operating conditions 10 to 40°C

Ø  Single pressure specimen loading,

Ø  Electronic control with LC-Display with digital timerØ  ½ HP Independent polishing head motorØ  1 HP High torque AC motor

Ø  10” Aluminum Disc hold up to 5 moulds(30mm)

Ø  Variable Speed 50-600 RPM Ø  Specimen Preparing Time 0-999min

Additional Information:

• Minimum Order Quantity: 1 Number

This Machine is Automatic Mounting Press for metallographic specimen. It is suitable for all Thermosetting Materials, because of the cooling system. It can automatically finish with the heating temperature, the holding time and acting force. The operator can change 4 specification patterns according to the difficult specimens. It can make 2 specimens at one time.

 SPECIFICATION:

 Ø High speed mould heater with built-in water cooling coils. Built in Hydraulic system.

Ø 1200 Watts Mould Heater

Ø Provision to accommodate 1 1/2" and 2" dia.

Ø 30mm dia. comes with the Machine as Standard

Ø Quick heater for speedy operation

Ø Digital Temperature indication/control

Ø Timer and buzzer for Heating and cooling cycles.

Additional Information:

• Minimum Order Quantity: 1 No

With the firm commitment to quality, we are offering assured quality Stereo Zoom Microscope to our esteemed clients. These products are utilized to magnify micro object continuously and accurately to show 3 dimensional image for observation studies in health, medical, forestry and zoology department as well as for repair of tiny precision spare parts of electronic and jewelery.

 

Features:

 

• Objectives range of zoom magnification: 0.7x-5x

• 10x Eyepieces field is extra wide and clear

• The observation eyepieces tubes are inclined at 45 degree and can be rotated 360 degree, the adjustment range of: 53-75mm

• Diopter adjustment ring on ocular tube

• All lenses are imported and anti-fungal treated

• Provision for camera port at top of the microscope

 

Specifications:

 

• Eyepiece: Wide field Eyepieces 10X (Paired) FOV 22mm
• Objectives: Zoom 0.7X to 5x with magnification ratio of 6:1
• Magnification Range:  7X – 50X
• Working Distance:  98 mm

Mechanical Body:

• Lateral zoom control movement

• Reflected and transmitted light system with 12V-10W halogen tungsten lamp

• The system regulated with transformer has intensity control knob

• On/off switch provides flexibility to use either both light or any of them

• Clip for holding specimen

• Base size is 260 mm X 290 mm

MAIN FEATURES:-

      LCD displays all the cutting data..

      The diameters of specimens to be cut range from 5mm to 80mm (100B:100mm) and    the cutting capacity reaches 100mmx200mm..

      Manual cutting and automatic cutting can be changed over at random

      Large cutting chamber and tempered-glass view window

      Non-burnt movable cutting mode which greatly improves cutting quality.

      Automatic retract at the end of cutting operation.

      Dual-direction feel which increases the depth of cutting.

TECHNICAL SPECIFICATIONS

      Cutting Speed: 2.25, 3, 45, 5, 7, 9, 12, 15 mm/min

      Revolution of abrasive wheel:: 2100rpm

      Specifications of abrasive wheel: 350x2.5x32

      Display: high-resolution negative lattice LCD

      Power: three phases, four cables, 380V, 50Hz

      80z overall dimensions: 780mmx 800mmx600mm

      100B overall dimensions: 930mmx 700mmx610mm 

In order to cater ever changing demands, we are able to come forth with high quality Automatic Metallography Cutting Machine at the most comprehensive range of price. These products are widely accepted as well appreciated by the large number of clients due to its optimum results and appreciated performance.

 

Features:

 

• Cost-effective
• High performance
• Seamless finish
• Highly durable
• Optimality

 

Specifications:

 

• Wide field eyepiece 10 X (Paired) FOV 22 mm

• M - long working distance plan achromatic 10 X WD 11 mm

• M - long working distance plan achromatic 20 X WD 9 mm

• M - long working distance plan achromatic 50 X WD 3.8 mm

• M - long working distance plan achromatic 80 X (SL) Dry

 The Material Analysis Software that we deal in is used in varied applications and brings huge appreciation for the company as well. The Material Analysis Software that we bring forth is properly tested before its delivery to the esteemed clients in the global market.

 

The Material Analysis Software that we deal in is used in varied applications and brings huge appreciation for the company as well. The Material Analysis Software that we bring forth is properly tested before its delivery to the esteemed clients in the global market.

 

Additional Information:

• Minimum Order Quantity: 1 Number

Product Details:

The mounting press is a mechanical type machine. The thermo set plastics together with specimen being mounted is formed under heated conditions. During this process the pressure is self adjusted by a handle fixed inside the machine.

           The mounting press is equipped with a digit temperature controller to establish real-time temperature meanwhile, a timer is equipped to realize the semi-automation of sample – making, while obviously increasing working efficiency. For each specimen-mounting, 8-10 minutes is enough and a mirror-like specimen can be acquired.For permanent  mounting of metallographic or rock specimen  in thermostaticPlastic, we offer bakelite mounting press, the unit is of a rugged construction and is activated by an hydraulic press, capacity 6-8 ton. The press is supplied complete with mould heater and thermometer. As a standard outfit 25/32/40mmdia mould assembly is supplied along with the machine .The temperature is controlled with Digital controller. Timer with buzzer facility is given within the panel which shows in digital

 

     Technical Data:-

 

Operation              :-          Manually by plunger.

Sample Operatio  :-          At a time single operation can done.

Heating Element  :-          750 watt.

Hydraulic Jack      :-          Capacity 6-8 ton

Digital Controller :-          0-300.degress

Dimensions          :-          300mm W x 350mm D x 750mm H.(Approx.).

Weight                   :-          80-120 Kg. (Approx.)

 

OPTIONAL ACCESSORIES:-

 

Moulding Release spray                                  

Rs. 250.00/each bottle

Moulding Powder                                             

Rs. 125.00/Kg

Spare Heaters.                                                  

Rs. 1500.00/each 

iWorks segmentation is a comprehensive metallurgical software suit offer analysis and reporting to international specifications. The computer base material testing analysis system is integrated with a high resolution scientific grade microscope camera and includes the following modules.

Product Details:

The mounting press is a mechanical type machine. By turning the hand-wheel of the machine, a couple of bevel gear is rotated to drive the screw rod which in turn pushes/pulls the lower die up and down along the mould sleeve. The thermo set plastics together with specimen being mounted is formed under heated conditions. During this process the pressure is self adjusted by a spring fixed inside the machine. A signal light is used to indicate the pressure level.

                                                                                                                       The mounting press is equipped with a digit temperature controller to establish real-time temperature meanwhile, a timer is equipped to realize the semi-automation of sample – making, while obviously increasing working efficiency. For each specimen-mounting, 8-10 minutes is enough and a mirror-like specimen can be acquired. 

 

 

 

 

 

 

 

With the firm commitment to quality, we are involved in manufacturing and providing a sustainable quality Belt Polisher (Grinder). The offered range is developed for initial rough grinding, with ¼ and ½ hp motor. The grinder has rigid construction complete enclosed body with full cover mask in its base.

Features:

 

• Cost-effective
• Highly durable
• Optimality
• High performance
• Seamless finish

 

Specifications:

 

• Working on 220 V in single phase

• Operation: Manual

• Belt: 100/915 mm endless belt

• Pulleys: Balanced aluminum pulleys

• Polishing motor power ¼ HP. single/ single phase, ½ HP single/ single phase